Pilot Program: Launching Indoor Navigation in a Single Aisle Before Rolling Out the Whole Store
A low-risk pilot plan to prove indoor navigation works for your retail store before committing to a full rollout. Timeline, metrics, and what to watch for.
Retail owners are rightly cautious about committing to a new technology that will be visible to every shopper. The best way to de-risk indoor navigation isn't a vendor demo β it's a pilot in your own store. Here's how to design one that gives you real signal in two to four weeks.
Why pilot in one aisle first
Three reasons:
1. Isolate the signal. A whole-store rollout mixes early-adopter enthusiasm with normal operations noise. A single-aisle pilot lets you compare "with navigation" and "without" shoppers in the same session.
2. Catch setup mistakes cheaply. The first-time map builder makes mistakes. Catching them in one aisle costs ten minutes to fix. Catching them in a whole store costs a day.
3. Convince yourself. Reading a vendor's case study is one thing. Watching three of your own shoppers use the tool successfully is another. You're the hardest critic to persuade.
Picking the pilot aisle
Pick an aisle that meets these criteria:
- Mid-complexity. Not the easiest (e.g. a 5-SKU aisle where everything is obvious) β the gains will be invisible. Not the hardest (e.g. your biggest, most varied aisle) β too many variables.
- High traffic. You want sample size. Pick an aisle that gets at least 30% of your foot traffic.
- Products with searchable names. If every product in the aisle is a generic (e.g. "fresh produce"), search won't help much.
A typical good choice: a medium-sized aisle with 30β80 products, decent brand variety, moderate foot traffic.
Setting it up (one afternoon)
Day 0 of the pilot:
- Sign up for StoreNavigator on the free plan.
- Set up your store with just the pilot aisle mapped. Skip other aisles for now.
- Add the aisle's products (30β80 of them).
- Print QR codes:
- One A5 at the store entrance. Even though only one aisle is mapped, the entrance QR is where shoppers start.
- One A6 at the start of the pilot aisle.
- Add a sign at the entrance: "New: can't find a product? Scan to search our store." Keep it low-key β you're not launching, you're piloting.
Total setup: 2β4 hours.
Baseline measurement (week 1)
Before you drive attention to the tool, get a week of organic data:
- How many shoppers scan the entrance QR without prompting?
- How many sessions result in a search?
- What percentage of searches return a result (because your pilot catalog is small, many won't)?
- Watch for any shopper confusion β did someone scan and look lost?
Normal result: 5β15% of shoppers find and use the tool unprompted in week 1. Low scan rate is fine for the pilot β you're validating the mechanics, not the marketing.
Nudged launch (week 2)
Starting week 2, add staff involvement:
- Train your floor staff: "If a shopper looks lost in the pilot aisle, mention the entrance QR. Example: 'If you can't find it, there's a QR code at the entrance that shows you a map.'"
- Add a second poster at the pilot aisle entrance: "Scan here to see what's in this aisle."
- Keep the overall store experience unchanged elsewhere.
In week 2, scan rates should climb to 15β30%. If they don't, something about your signage or placement is off.
What to measure
Four metrics:
1. Scan rate. % of shoppers scanning the entrance QR. 2. Search completion rate. % of scanned sessions that result in at least one search returning a product. 3. Pilot aisle basket contribution. Before/after % of baskets containing a pilot-aisle item. 4. "Not found" searches. A list of what shoppers searched for but didn't find. (Catalog gaps.)
All of these are visible in the StoreNavigator analytics dashboard.
What to look for
Positive signals:
- Scan rate climbing week over week.
- Pilot-aisle basket contribution rising.
- Shoppers scanning aisle QRs mid-trip (indicates they're actively using the tool).
- "Not found" searches you can address by adding products or re-mapping.
Negative signals:
- Scan rate flat at <5% after week 3. Something's wrong β likely signage, placement, or shopper mix.
- High search volume with low completion (shoppers searching but finding nothing). Your catalog may be too small or mis-categorised.
- Shoppers abandoning the tool mid-session. Watch for UI confusion.
Decision at week 4
End of week 4, you should have a clear read:
If it worked: scan rate above 20%, basket contribution up, shoppers using it voluntarily. Roll out store-wide.
If it kinda worked: scan rate 10β20%, mixed signals. Add more products, improve signage, run another two weeks before deciding.
If it didn't work: scan rate <10% despite good signage. Pause. Diagnose whether the issue is tool fit, store fit, or marketing. StoreNavigator's free tier means you've lost nothing but time.
The common surprise
Most pilots we've seen produce an unexpected positive side effect: the owner starts using the analytics dashboard for merchandising decisions, independent of whether shoppers heavily use the PWA. "Oh, 40 people searched for 'protein powder' last week and we don't carry it" is actionable even if only 10 people used the search.
The analytics dashboard alone can justify the subscription cost, even before shopper adoption climbs.
Rolling out store-wide
If the pilot succeeded, the full rollout plan:
- Map the rest of your store. Expect 1β2 full afternoons for a 500-SKU store.
- Import your remaining catalog via CSV.
- Print additional aisle QRs and place them.
- Upgrade to the Starter or Pro plan if you've exceeded 50 products.
- Launch marketing: receipt mentions, Instagram posts, maybe a short in-store announcement.
Total elapsed time from pilot-end to full rollout: 1β2 weeks.
Try it
Start the free pilot β. Or see the live demo first β to understand what you'll be deploying.
Honest advice: don't overcommit. Pilot one aisle, measure for four weeks, decide from data. That's the only way to feel confident at full launch.